Requirements for decoration structure of dust-free workshop

1. The decoration of dust-free workshop can be regarded as an independent space. Imagine that you are almost disconnected from the outside world, but not completely disconnected. Then, the external circular corridor becomes a buffer zone for the dust-free workshop to communicate with the outside world, which can minimize the pollution brought by the outside world. The windows decorated in the dust-free workshop shall be aligned with the wall, and the windowsill shall not be placed.

2. The doors and windows decorated in the dust-free workshop must be covered with metal or metal, and wooden doors and windows shall not be used to avoid long-term exposure to the humid environment.

3. The window on the outer wall shall be flush with the inner wall. The windowsill is inclined or does not leave the windowsill, and it is a fixed double-layer window to reduce energy loss.

4. The number of layers and the structure of the outer window must be fully considered to seal the humidity of the air and make it difficult for the polluted particles to penetrate from the outside. Sometimes the temperature difference between the inside and outside is too large to cause condensation. In order to avoid this situation, the space between the sealed door and the internal window needs to be sealed.

5. Doors and windows shall be made of materials with good weather resistance, small natural deformation, small manufacturing error, good sealing, simple shape, not easy to dust off and easy to clean, and the door of the frame has no threshold.

Summary: it is worth noting that after confirming the structural requirements for the decoration of the dust-free workshop, when preparing to decorate the dust-free workshop, it is necessary to analyze the vehicle route, pipeline system, exhaust pipe, treatment of raw materials and the operation of the dust-free workshop. Shorten the motion line to avoid cross and cross pollution. A buffer zone must be set around the dust-free workshop, that is, the access of manufacturing equipment, which shall not have a significant impact on the operation.